Forklifts are vehicles commonly found in factories, warehouses and different work sites where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift which hydraulically lowers and raises the load. The "cat" is the protected area where the forklift driver sits.
Forklifts could lift loads that weigh between one to five tons. Several models can be utilized to raise shipping containers and loads that are much heavier.
The tires of a forklift should be checked and maintained regularly. The kinds of tires on various forklifts vary based on factors like for example frequency of use, weight of the loads and ground surfaces. Every driver of a forklift should have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You should regularly inspect the tires. Watch for indications of wear and damage to the tires. If the wear on the tire exceeds 40 percent, it should be replaced.
When buying tires, make sure that you are buying the right kind - solid, pneumatic or polyurethane.
When you have to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you lift the forklift high enough.
You can use the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and secure it properly. If you are changing more than one tire and you only have one jack, lower the forklift, then reposition the jack at the next tire.
A repair company could provide on-site tire repair. If the tire is extremely big for both mobile and in-house tire presses, the damaged tire would have to be transported to a shop which has a stationary tire press.