Change a Propane Tank
Propane fueled forklifts are normally utilized inside warehouses. The forklift is made with the propane tank mounted behind the driver. The tanks, which look a lot like beer kegs, need to be replaced every so often because they have a limited lifespan. Forklift operators must utilize caution when handling propane tanks. Compressed gases are hazardous, especially since the gas is flammable. Use care when replacing and removing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn the tank valve off. The lift truck must be left on until the engine dies. This process burns the gas off inside the transfer hose that connects the engine and the tank. Prior to taking the next steps, wear the proper safety equipment, like for example insulated gloves made of either neoprene or leather. It is important for you to protect your skin from touching the compressed gas, which is extremely cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be checked simply by applying soapy water to the valve and opening it slightly. If there is a leak, it will cause bubbles to foam from around the valve. If this occurs, check the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and then do the leak checking procedure again. Persistent leaks mean that both the nut and connecting hose should be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Then you can start the forklift and continue operating.